Shamsan N6 CIF Series Manual de usuario Pagina 307

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 355
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 306
295
Parameter
Function
The value ranges from 1s to 300s.
Show
message
System can pop up a message to alarm you in the local host screen if
you enabled this function.
Alarm
upload
System can upload the alarm signal to the centre (Including alarm
centre.
Send
Email
If you enabled this function, System can send out an email to alert you
when an alarm occurs.
Buzzer
Check the box here to enable this function. The buzzer beeps when an
alarm occurs.
7.8.4 Storage
7.8.4.1 Schedule
In this interfaces, you can add or remove the schedule record setup. See Figure 7-66.
There are three record modes: general (auto), motion detect and alarm. There are six periods in
one day. Please make sure you have enabled the corresponding record mode in the Setup-
>Storage->Conditions.
You can view the current time period setup from the color bar.
Green color stands for the general record/snapshot.
Yellow color stands for the motion detect record/snapshot..
Red color stands for the alarm record/snapshot.
Figure 7-66
Vista de pagina 306
1 2 ... 302 303 304 305 306 307 308 309 310 311 312 ... 354 355

Comentarios a estos manuales

Sin comentarios